UPVC Door Handles Replacement Guide
Replacing door handles made of upvc is a straightforward DIY project when you have the right measurements. These measurements include the distance between the handle's backplate fixing centres (sometimes referred to as PZ) and the centre of the key hole.
The most common type of uPVC door handle has two inline levers both internal and external that is connected via spindles. They operate the multi-point lock found in uPVC, aluminium and some wooden doors.
Brands & finishes
A damaged uPVC door handle could be more than just a minor inconvenience. It can also make your home vulnerable to intruders who might be able force the lock to open and gain entry into your home. It's important to take action when you notice your uPVC handles are breaking down.
It's good to know that replacing your uPVC handles on your front door is a relatively simple task that only requires a few tools as well as meticulous measurements. In most instances, you'll need to screw in your new uPVC handles and you'll be good go. It's always best to choose locks and handles that are of the highest standard of security.
There are a number of different kinds of uPVC handles available that you can select from. They include lever/lever, pad, offset and snib handles. Lever/lever handles are a favorite among homeowners and comprise of two inline handles that can be moved. Pad uPVC handles are smaller and come with an offset design. This lets you protect the exterior of your house after entering.
A uPVC offset handle consists of two pads that are fixed, and the second one movable. This kind handle is typically used on sliding patio doors. Snib handles are similar to offset handles but can be employed on uPVC french doors.
When selecting a replacement uPVC door handle, you should take into consideration the style of your current windows and doors. The handle must match your doors' existing ones in terms of colour and finish. Certain handles come in a range of finishes that include black and white and others can be found in more elegant choices like chrome or gold.
It is important to make sure that you get your screw-to-screw as well as PZ measurements right when you're taking measurements. The PZ measurement is a distance between the center of the spindle hole and the center keyhole. The screw-to screw dimension is the distance from the screw hole on your existing handle to the nearest screw on the door frame. It is important to measure it accurately to find an appropriate replacement.
Measurement & Fitting
A uPVC door handle has two levers that are located on either side of the lock mechanism permitting easy operation both from the inside and outside. Handles are an essential component of the security system on doors. They provide a comfortable grip, and they function without effort. With the proper uPVC handles, you'll be able to ensure your door is secure and look stunning while doing it.
Selecting the right uPVC handle can be difficult and confusing as there are a variety of sizes, shapes and styles on offer. There are three essential measurements to take into consideration when choosing a replacement for your uPVC doors. The backplate fixing center as well as the keyhole and lever size, and the spindle's diameter are important measurements. Incorporating these factors will ensure that your new handle fits your uPVC door and gives you an excellent fit.
Measuring these points is relatively straightforward, but you should be as accurate as possible. You could end up with a handle which doesn't fit correctly and causes problems when opening your uPVC doors. The most important measurement is the top screw that is on the backplate's fixing centre, commonly referred to as the PZ size. This measures from the pivot point of the keyhole or handle lever to the center of the screw. This is usually 92mm however it is possible to vary.
Make sure that the uPVC handles on your doors have the right number of keyspindles to match your multi-point locking. Idealy, they should be in line with the number of keys you use to lock or unlock your uPVC door. Some older doors may have only one spindle to operate the lock, but more modern doors will have two spindles that allow for independent operation from inside and out.
The most undesirable thing to have is a drooping or sagging uPVC door handle because it can put a great deal of stress on the locking mechanism within and may result in broken parts. To avoid this, look for an assortment of uPVC door handles that come with spring cassettes. They are not only visually appealing, but they could also give your door locking mechanism a longer time by removing a portion of the operating force.
Broken Spring Cassettes
When a door handle becomes stiff it can often be caused by a fault within the tubular latch itself. This is usually a simple solution and can be solved by repositioning the internal fixing plates of your replacement handle. First open the door and check that there are no obvious obstructions to the latch plate like loose screws or evidence of internal parts that are visible. If this is not the case, then one of the springs on your uPVC handles might require a change.
The simplest way to do this is to buy the door handle repair kit. This will contain all the tools needed to take the handles off and then reposition their cassettes. Follow the directions and you'll soon have a sagging / drooping uPVC handle that is fully functional.
A loose uPVC door handle can also be the result of thermal contraction, but is more often an indication that the gearbox inside is broken. This isn't something that can be fixed at home and will require the help of a locksmith expert.
It is important to use a genuine replacement gearbox for your uPVC doors. This will ensure that everything is installed correctly. Using an aftermarket replacement that is cheaper may result in problems, such as the lock being defective or causing less security for your home.
You could also replace the entire uPVC lock and handle mechanism. This will not only solve the sagging issue but it will also ensure that your handle is functional and secure. This is not a cheap or quick solution. It requires the removal of your old uPVC handles and replacing them with a brand new one. It's important to note that this option is only suitable for those who have a sprung handled double glazing door as the door will have to be repaired. For a quicker and cheaper alternative, you can buy handles that have built-in springs which should reduce the need to drill the doors.
Can I install a uPVC door handle on an aluminium or timber door?
There are a variety of things to consider when choosing doors for your house. Aluminium doorways are modern and stylish, while uPVC offers durability as well as energy efficiency, and security. The right handle is crucial for the style of door you wish to install. If you are looking to replace your old handles or even add new ones, it's crucial to select the correct ones for your property. Our uPVC replacement door handle guide will assist you make the right decision and install it with confidence.
Switching repairmywindowsanddoors of an uPVC handle is fairly simple and requires only basic tools. You will first have to remove the current handle. You can take out the screws holding it in place with the help of a screwdriver. After the screws have been removed, you can pull the handle from the door.
Next, you will need to measure the dimensions of your door handle. To measure this, you'll need to find the centre of the back plate fixing holes. This is often referred to as the PZ measurement. It will determine the size of your handle spindle. Once you have this information, you'll be able to purchase a door handle replacement that is the right size.
There are a variety of different kinds of uPVC door handle available to meet your specific needs. Some of these handles come with extra security features, such as anti-drilling security as well as cylinder guards and mole grips. These uPVC handle designs can be fitted to uPVC, aluminium and wooden doors and are ideal for homeowners who want to increase security in their home.
If you're seeking a more traditional uPVC handle, there are also choices to meet your preferences. They are available in a variety of finishes, including black, chrome and gold. They are generally slightly more expensive than standard ones, but they will provide a beautiful appearance to your door.
It is crucial to determine the dimensions of your selected uPVC handle prior to placing an order. You should verify the dimensions listed above, as well as the keyhole and lever dimensions and the backplate mounting centre to ensure that your new handle is a good fit for your door.